Epoxy Adhesive
High-strength, non-shrinking epoxy adhesive for bonding and insulation.
Crystal transparent, impact and water resistant.
For bonding and insulation in electronic parts and assembly.
Bonding in ferrite wood and concrete, souvenir assembly.
Features
- Used for bonding acrylic, ceramic, fiberglass, glass, porcelain, metal, wood, and concrete.
- Tensile Strength: 2500 psi (175 kg/cm2)
- Color: Transparent
- Waterproof
- Operating Time: 30 Minutes
- Drying Time: 30 Minutes
- Curing Time: 8 – 12 hours
- Temperature Range: -5°C to 95°C
Recommendations for use
Mix only the amount of product that can be used during the working period.
You can repair damaged enamel and porcelain surfaces by mixing colored gypsum powder with epoxy. You can also add color pigment concentrate. This should be done after the hardener and resin have been thoroughly mixed together. You can apply removable tape to surfaces that you do not want the epoxy to contaminate. Remove the tape before the epoxy cures.
Two-component, fast curing, transparent, general-purpose epoxy.
Gives better results on hard surfaces.
It is used for repairs on cars, bicycles, boats, and many other areas.
It can also be used as a metal filler and can be used to replace rotting wood.
Apply the mixed epoxy to the area to be repaired.
The flow-mix tip automatically mixes the resin and hardener.
Includes two self-mixing flow-mix mixing tips.
Features
Bonds metal, wood, glass, ceramics, concrete, stone, porcelain, and fiberglass.
Tensile Strength: 1500 psi (105 kg/cm2)
Color: Transparent
Waterproof
Operation Time: 5 minutes
Drying Time: 8-10 minutes
Curing Time 1 Hour
Temperature Range: -5°C to 95°C
Recommendations for use
Pull the piston back slowly (0.7 cm) so that air bubbles rise to the surface and do not enter the Flow-Mix mixing tip.
Push the piston evenly downwards to obtain an even amount of resin and hardener.
Note: In order for this product to cure properly, the hardener and resin must be thoroughly mixed.
If both mixing tips have been used and there is still epoxy left to be used, it can also be mixed manually
Two-mix epoxy putty.
It is in the form of an interwound rod.
It makes permanent leakage repair on metal, fiberglass, concrete, and ceramic, allowing holes and cracks to be closed.
It is a practical stick package kneaded by hand, adheres to wet surfaces, can be applied underwater, dries fast, and can be leveled and painted after hardening.
Recommended applications: It is used for repairing cracks and broken parts in tanks and barrels, repairs in installations and pipes, repairs of machinery and equipment, points in contact with drinking water, and underwater repairs.
Waterproof. It can work in salty or fresh water.
Features
Bonds metal, concrete, wood, ceramics, fiberglass, hard plastic, PVC.
Tensile Strength: 1500 psi (105 kg/cm2)
Color Off White
Waterproof.
Operation Time: 2-3 Minutes
Drying Time: 3-4 minutes
Complete Curing: 24 hours
Temperature Range: 93°C dry, 51°C wet
Recommendations for use
Cut, mix, glue! Cut the amount you need for application and knead the product until you get a homogeneous color, apply to the area to be repaired.
Shape to adhere to any surface of your choice. Mix only the amount of product that can be used within the working time. After it has completely cured, it can be sanded, slotted, machined, drilled, drilled, or painted.
Two-component, high-strength cold welding epoxy that can be drilled, tapped, machined and filled when fully cured. Fills gaps and repairs cracks. Contains a non-corrosive steel alloy. Can be used on all kinds of metals. Can be used on broken furniture, tools, appliances, devices, toys, automobiles and many more. Does not catch fire. It does not rust. Waterproof.
Features
Bonds steel, stainless steel, aluminum, brass, brass, iron, tin, copper.
Tensile Strength: 2500 psi (175 kg/cm2)
Color Dark Gray
Run Time: 60 Minutes
Drying Time: 6 hours
ÇFully Curing: 16-24 hours
Temperature Range: 93°C continuous, 121°C intermittent
Recommendations for use
Mix only the amount of resin and hardener that can be used during the working period.
The resin and hardener must be thoroughly mixed for this product to cure properly.
Excessive exposure of epoxies to chemicals and solvents is generally not recommended. Not recommended for use on polyethylene and polypropylene plastics.
Structural epoxy adhesive with gap-filling capacity.
It is an ideal material for bonding different surfaces, metals, ceramics, wood, etc.
It is resistant to environmental conditions, high humidity, and temperature changes and requires very little surface preparation. The cured adhesive can be drilled, sanded, and painted.
Rigid plastic adhesive PVC, acrylic, ceramic, concrete, fiberglass, metal, wood, vinyl adhesive
Features
Bonds hard plastic, styrene, PVC, acrylic, ceramic, concrete, fiberglass, metal, wood, vinyl.
Tensile Strength: 3500 psi (245 kg/cm2)
Waterproof.
Color: Cream
Working Time: 4 – 5 Minutes
Drying Time: 10 – 15 Minutes
Curing Time 24 Hours
Temperature Range: -5°C to 95°C
Recommendations for use
Do not freeze; store at temperatures between 13°C and 24°C. For this product to cure thoroughly, equal amounts of adhesive and activator must be thoroughly mixed. Mix only the amount of product that can be used during the working period. Does not adhere to polyethylene or polypropylene plastics. Not recommended for use on copper and brass surfaces.
Industrial one-component adhesive for flexible permanent rubber bonding.
Bonds rubber, tent cloth, tarpaulin, wood, metal, and some plastics.
Resistant to ultra-violet rays, weather conditions, oils, acids, and alkalis.
Repairs, fills, insulates, provides waterproof repairs.
It is used for bonding rubber to metal, bonding rubber to rubber, bonding rubber patches, bonding rubber to plastic, repairing zodiac boots.
Specifications
Resistant to UV, weather conditions, oils, acids and alkalis.